Assembly Instructions

STEP 3

1. Place the Right side door(5) and Left side door(6) to the Left lower support board(2) and Right lower support
board(3) in position as shown in diagram above. Door panels will have the backside facing you.
2. Insert 4 Wood screws(F) through holes in the Hinge(G) on the Left side door(6) then tighten to Left lower
support board(2) by using a Philips screwdriver.
3. Insert 4 Wood screws(F) through holes in the Hinge(G) on the Right side door(5) then tighten to Right lower
support board(3) by using a Philips screwdriver.
STEP 4
1. Attach the Shelf(8) to the assembled part as shown above.
2. Insert 2 Wood screws(I) through holes in the shelf(8) then tighten to the Left lower support board(2) and Right
lower support board(3) by using a Philips screwdriver.
3. Insert 2 wood dowels(C) into the dowel holes on the Shelf(8).