Assembly Instructions

STEP 17

1. With a nail or screw mark the 4 holes on the wall that will be used to attach the plastic wall anchors(O) and
anchor screws(P).
2. Drill the holes on the wall where you have marked the 4 spots in step 1 above.
3. Insert 4pc Plastic wall anchor(O) into the holes on the wall using your hand or small hammer.
4. Insert 4pc Long screw(P) through the holes on the Lower and upper side panels, then tighten to the Plastic
wall anchor(O).
5. Put the Shelf(7) onto the Plastic holders(L).