Assembly Instructions

STEP 7

1.Attach the right side door (5) and left side door (6) to the left side support board (2) and right side support board (3).

2. Insert 4 screws (H) through holes on the Hinge (G) of the left side door (6) then tighten to left side

support board (2) by using a Philips screwdriver.

3. Insert 4 screws (H) through holes on the Hinge (G) of the right side door (5) then tighten to right side

support board (3) by using a Philips screwdriver.

STEP 8

1. Attach the shelf (8) to the pre-assembly both side support board (2),(3).

2. Insert 2 screws (M) through holes on the shelf (8) then tighten to the left side support board (2) and

right side support board (3) by using a Philips screwdriver.

3. Repeat the above step to assembly another shelf (8).

4. Attach the shelf (9) to the pre-assembly both side support board (2),(3).

5. Insert 2 screws (M) through holes on the shelf (9) then tighten to the left side support board (2) and right side support

board (3) by using a Philips screwdriver.