Assembly Instructions

STEP12

1. Place the drawing with hole position on the wall that you desire to hang the cabinet.

2. Drill 2 holes through the hole position on the drawing.

3. Insert 2 plastic anchors (F) into the holes.

4. Attach the cabinet in place w/holes, then insert 2 screws (O) through holes on the left side panel (11)

and right side panel (12) then tighten to cabinet to the wall by using a Philips screwdriver.

5. Insert 4 holders (B) into holes on the position that you desire to for the shelf (10).

6. Place the shelf (10) onto the 4 holders (B).

STEP13

1. Drill the 2 holes through the hole position on the drawing.

2. Insert 2 plastic anchors (P) into the holes.

3. Attach the cabinet in place w/holes, then insert 2 screws (O) through holes on the left side panel (11)

and right side panel (12) then tight to cabinet to the wall by using a Philips screwdriver.