ASSEMBLY INSTRUCTIONS TALL CORNER FLOOR CABINET WHITE ESPRESSO This cabinet requires assembly by an adult because of small parts, care should be taken in unpacking and assembly of this item Young children can be killed when furniture tips over. Don’t use for TV stand. Use angle-braces or anchors to secure furniture to wall.
WARNING: THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS.
PARTS LIST
STEP1 STEP1 1. Insert 1 screw (H) through hole on the magnet plate (F) then tighten to right side door (5) by using a Philips screwdriver. 2. Attach knob (C) to the right side door (5),insert 1 machine screw (D) which comes with knob through hole on the right side door (5) then tighten to knob (C) by using a Philips screwdriver. 3. Insert 2 screws (H) through holes on the hinge (G) then tighten to the right side door (5) by using a Philips screwdriver. 4. Repeat the above step to assemble another hinge .
STEP 3 STEP 3 1. Insert 2 screws (J) through holes on the magnet (E) then tighten to the shelf (9) by using a Philips screwdriver. 2. Insert 2 wood dowels (A) into the dowel holes on the shelf (9). STEP 4 STEP 4 1. Insert 2 wood dowels (A) into the dowel holes on the shelf (7). 2.
STEP 5 STEP 5 1. Insert 2 wood dowels (A) into the dowel holes on the shelf (8). 2. Insert 2 wood dowels (A) into the dowel holes on the another shelf (8). STEP6 STEP6 1. Insert 4 wood dowels (A) into the dowel holes on each end of the front upper board (1). 2. Insert 4 wood dowels (A) into the dowel holes on each end of the cross bar (4). 3. Attach the left side support board (2) to the front upper board (1) and cross bar (4) by inserting wood dowels into dowel holes on the left side support board (2).
STEP 7 STEP 7 1.Attach the right side door (5) and left side door (6) to the left side support board (2) and right side support board (3). 2. Insert 4 screws (H) through holes on the Hinge (G) of the left side door (6) then tighten to left side support board (2) by using a Philips screwdriver. 3. Insert 4 screws (H) through holes on the Hinge (G) of the right side door (5) then tighten to right side support board (3) by using a Philips screwdriver. STEP 8 STEP 8 1.
STEP 9 STEP 9 1. Attach the shelf (7) to the right side panel (11) by inserting wood dowels into dowel holes on the right side panel (11). 2. Insert 1 screw (M) through hole on the right side panel (11) then tighten to the shelf (7) by using a Philips screwdriver. 3. Repeat the above step to assembly another shelf (7). STEP 10 STEP10 1. Attach the shelves (7) and right side panel (11) to the pre-assembly both side support board (2),(3) and shelves (8),(9). 2.
STEP 11 STEP11 1. Insert 3 screws (M) through holes on the right side panel (12) then tighten to the shelves (8) and the shelf (9) by using a Philips screwdriver. 2. Attach the left side panel (12) to the pre-assembly cabinet. 3. Insert 12 screws (M) through holes on the left side panel (12) then tighten to 2 shelves (7),2 shelves (8) and the shelf (9) by using a Philips screwdriver. 4.
STEP12 STEP12 1. Place the drawing with hole position on the wall that you desire to hang the cabinet. 2. Drill 2 holes through the hole position on the drawing. 3. Insert 2 plastic anchors (F) into the holes. 4. Attach the cabinet in place w/holes, then insert 2 screws (O) through holes on the left side panel (11) and right side panel (12) then tighten to cabinet to the wall by using a Philips screwdriver. 5. Insert 4 holders (B) into holes on the position that you desire to for the shelf (10). 6.
YOU CAN ENJOY YOUR NEW CABINET NOW! Attention Adults: The cabinet should be check periodically for damaged or loose screws/parts. Take appropriate action necessary to correct the hazard such as tightening of screws and taking any damaged parts away from the children. Thank for purchasing these Products. We hope you enjoy them.
