Operation Manual

www.rebox.tv

To set the position of your selected satellite:

1. Use your UP/DOWN buttons to go to the “Movement field”.

2. Use your Left/Right buttons to have your dish turn towards the right direction, and keep this

direction button pushed in continuously. Once the receiver has found the right position for the

selected satellite, the word “Locked” will appear above the signal level and quality indicator. To be

sure you have the strongest signal possible, press the direction you moved your dish in once

again, and look if the signal/quality improves. If this is not the case, move the dish back one

position, by pressing the other direction once.

3. If you are sure that you have the strongest signal/quality for the selected satellite:

• Use your UP/DOWN buttons to go to the “Save” field.

• Use your Left/Right buttons to set to “On” and press OK. The position for the selected

satellite is now saved and your dish will move to this position, every time a channel from this

satellite is chosen.

Repeat this procedure for every satellite position and once you have complete the settings: Use Red (Auto Scan),

Green (Net. Scan), Yellow (TP Scan) or Blue (PID) to search channels.

5.1.4.4 Parental Lock - Changing PIN Code

This function changes the Personal Identification Number (PIN) that is used to control access to the menu and

individual channels. In this function, you can lock/unlock channels and you can change your PIN code by applying

the following steps: To lock/unlock the menu, please apply the following steps:

1. Press the Menu button on your remote.

2. Using UP/DOWN keys on your remote, select "Installation" and press OK.

3. Enter your PIN code.

4. Using UP/DOWN keys, select "Parental lock" and press OK.

5. Using RIGHT/LEFT keys in the “Menu” field, you can select either "lock" or "unlock" and press the

Red button to save, the Green button to save & exit, or the Yellow button to return without saving.

By selecting "lock", the receiver asks you to enter your PIN every time you want to access the

menu. By selecting "unlock" it gives you the possibility to access the menu all the time without the

receiver asking you for a PIN code.

To change your PIN code, apply the following steps:

1. Press the Menu button on your remote.

2. Using UP/DOWN keys, select "Installation" and press OK.

3. Enter your PIN code

4. Using UP/DOWN keys, select "Parental lock" and press OK.

5. Using UP/DOWN keys, select "Old PIN" and enter your PIN

6. Using UP/DOWN keys, select "New PIN" and enter a new PIN

7. Using UP/DOWN keys select "Verify PIN" and enter the same new PIN

8. Press the Green button on your remote to save & Exit

9. Press the BACK button until you go back to main menu.

You are recommended to write down your new PIN code. In case you forget it, you can reset your receiver to factory

default settings but you will lose all information you saved.

Your Personal PIN Code: _ _ _ _ _ _ _ _ _ _ _ _ _ _