Operation Manual

www.rebox.tv
40
• LNB Dish: Using the Left/Right buttons, select “Fixed” or “Motorised” (Move) Dish. If you use
a motorised dish, read the “Positioner Set-up” DiSEqC switch: The default is Off. To use
the DiSEqC switch, set up the DiSEqC version you have (V1.0 or V1.1).
• DiSEqC Input: Select position 1~4 if DiSEqC switch is DiSEqC V1.0. Select position 1~16 if
DiSEqC switch is DiSEqC V1.1.
• DiSEqC Repeat: Designate the repeat of switching (0 ~ 3).
• Switch 22 kHz: You can set the 0/22 kHz switch to ON or OFF.
Tip:
If you set “LNB type” to “Universal” (UNI1 ~ UNI3), you will not be able to change settings in both the
“LNB Power” menu item and the “Switch 22 kHz” menu item. If you want to change any of these two settings you
must set “LNB type” to zero. If DiSEqC switch is Off, you will not be able to change settings in both the “DiSEqC
Input” and “DiSEqC Repeat” menu items. Alternatively if you set LNB Dish to “Moved”, the DiSEqC switch menu
item is automatically switched to off if your “LNB dish” is set to “Fixed” you will be able to select the required DiSEqC
level in the DiSEqC switch menu item.
6. Press the Red (Save) button, the Green (Save & Exit) button to save the setting.
7. Press the Yellow (Back) button or BACK button if you don't want to save the setting.
5.1.4.3 Channel Set-up
The channel set-up is for downloading the channels available on the satellites. You can select the satellite
according to your dish alignment, change the frequency, scan mode, you can edit the satellites name, and edit the
transponder of the satellite. You can also display the LNB menu and the Positioner Set-up menu by selecting LNB
and Dish Position respectively.
1. Press the Menu button.
2. Using UP/DOWN keys on your remote, select "Installation" and press OK.
3. Using UP/DOWN keys, select "Channel Set-up" and press OK.
4. Use the UP/DOWN keys on your remote to select an item and use the Left/Right button to set up
any values.
• Satellite: Select “Satellite” and press OK or the Right button. The satellite list is displayed and then you
can choose a satellite from which you want to download your channels from by pressing OK.
• LNB: Select “LNB” and press OK or the Right button. In the “LNB field”, select one of the available LNB's.
If you want to set LNB related values, press OK and the LNB Set-up menu (Described in LNB Set-up)
will be displayed.
• Dish Position: Select “Dish position” and press OK or the Right button. It displays the dish position of the
current satellite. When you use a DiSEqC 1.2 positioner, you can select dish position in this field. To set
a dish position, the status must be “On” (in case the position has already been set) or “Off” (in case the
position has not been set).
Note:
If in the “LNB Set-up” menu described in section 5.1.4.2, the “LNB Dish” item is set to “fixed”
you will not be able to change the dish position settings in the channel set up menu. Only when you have
selected the “LNB Dish” to “moved”, you will be able to change the settings in the channel set up menu.
• Press OK button to set dish position. The “Positioner Set-up” menu will be displayed. (Detailed
description is in Positioner Set-up section 5.1.4.3.1)
• Frequency, Polarization, Symbol Rate: Shows the transponder (TP) values of the current satellite. To
change the value apply the following steps:
1. Select ”Frequency” and press OK. The list of TP values of the current satellite is displayed.
2. The functions of the colored buttons now represent other functions. <Screen 6>.
3. To edit a TP value, press the Red (Edit) button
4. To Add a TP manually, press the Green (Add) button
5. Press the Blue (Delete) button to delete the current TP value. (Save is only available in the
Edit mode or the Add mode.)
6. Press the Yellow (Save) button to save the settings.
• Scan Mode: “Canal Digitaal” (Only appears if in the field “Satellite” the “ASTRA” satellite
is chosen). Once you search channels in “Canal Digitaal” scan mode the receiver will do