Operation Manual

www.rebox.tv
37
5.1.3 The Timer Menu
The timer can automatically switch on or off your receiver at any time. This enables you for example to record
programs with your VCR while you are not at home. It also can be used to wake you up at the time you set it. Please
apply the following steps:
1. Press the Menu button.
2. Using UP/DOWN keys on your remote, select “Timer Menu” and press OK (Figure 13)
• Timer number: You can select up to 8 different events (Figure 14)
• Timer State: Set to “Enabled” to use the timer function, or "Disable” to stop the timer
functions of the timer number you selected.
• Action: You can select the following functions in the action mode:
• “Power On”: The receiver powers on at the designated date and time.
• “Power Off”: The receiver powers off at the designated date and time.
• “Time interval”: The receiver switches on at the designated date and time, displays
the channel and then switches off at the designated date and time (The value set at
the ending time).
• Repetition: You can set the cycle of the action designated in the timer mode (one time,
Every Day or Every Week).
• Date: You can set the starting date of the timer action. Enter the new date with the
[0-9] keys.
• Hour: You can set the starting time of the timer action. Enter the new time with [0-9]
keys.
• End Time: You can set the ending time of the channel view when the Action mode is
on Time Interval. Enter the new time with [0-9] keys.
• Channel: You can select the channel to be shown when the receiver timer mode
Powers ON. Press OK key, now the channel list will appear. Select the channel of
your choice and confirm with OK key.
3. Press the Red button to save and proceed with another timer event.
4. Press the Green button to save and exit the timer menu.
5. Press the Yellow button to exit the timer menu WITHOUT saving the settings.
Tip:
You have to select the channel, starting time, and ending time settings if the Action mode is “Time
interval”. An error message will appear if any of the settings are incorrect.
5.1.4 The Installation Menu
All settings that are related to TV, Dish, LNB and Satellites are within this menu. The installation menu contains
several sub menus such as “System Set-up”, “LNB Set-up”, “Channel Set-up” and “Parental Lock”. To access the
different sub menus, apply the following:
5.1.4.1 System Set-up Menu
To install your receiver to your personal preferences, please apply the following steps:
1. Press the Menu button.
2. Using UP/DOWN keys, select "Installation" and press OK.
3. Enter your PIN code.
4. Using UP/DOWN keys, select “System Set-up” and press OK.
• Language Settings: You can change the language of the menu, audio and subtitles by
applying the following steps:
1. Select “Language” and Press OK or the Right button.
2. Select “Menu Language” and Press OK or the Right button.
3. Using UP/DOWN keys, select the language in which you want your
menu to be displayed and press OK. The creen of the menu will
change to the language of your choice.
4. You can also choose your preferred first audio language, second audio
language and the subtitle language by applying the same steps.
5. Press BACK until you return to the main menu.