Installation Guide

Step 1: Measure
Measure the height and width (inches) of the desired surface area you will be covering with reborn
™
snow fence. To calculate the total square footage of the surface area, multiply the height and width
(inches), then divide the total by 144. Each box of reborn
™
snow fence comes with enough material
to cover 20 square feet. Be sure to add an additional 8% for cutting and waste.
Step 2: Prepare Surface
Ensure the surface is clean, dry and at. The surface must also be structurally sound and capable of
holding the wall boards once they are mounted. Remove any nails, pictures, etc. that would obstruct
hanging the wall boards. Although this is optional, the surface can be painted using a lighter
tint of the wall board color to hide gaps, knot holes and any other beautiful imperfections.
Step 3: Find Studs (for wall installation)
Identify where the studs are located in your wall and lightly mark them with a pencil.
2
◦ safety glasses ◦ nails
◦ dust mask ◦ construction adhesive
◦ tape measure ◦ caulking gun
◦ saw ◦ hammer / nail gun
◦ pencil ◦ stud nder
◦ level ◦ paint* (optional – see step 2)
TOOLS REQUIRED