User Manual

Version Number: Mig210-20201221A1

2、 Connect welding holder and ground clamp.

3、 To adjust the current, only the current can be adjusted.

Note:

1) The welding rod specification supported by Reboot mig210 is below 4.0(5/32in), usually 2.5(3/32in) and

3.2(1/8in). European style generally uses E6013, American style generally uses E7018, and stainless steel

generally uses ER308.

2) It supports welding of 1-8mm(1/64-5/64in) carbon steel and 1-5mm(1/64-7/32in) stainless steel. Aluminum

can not be welded. For carbon steel, please use carbon steel electrode. For stainless steel, please use

stainless steel electrode.

3) Connect the ground clamp to clean bare metal. No rust, paint or other coatings, and ensure good electrical

conductivity

4) The ideal distance between the welding rod and the welding object is 1-2mm(1/64-5/64in), to ensure that the

welding rod and the workpiece are in continuous and stable contact. The welding rod should not be too high

or pressed too low to avoid arc breaking and adhesion.