User Manual

Version Number: Mig210-20201221A1
18
stop working for a few minutes, let the machine cool for a period of time, and automatically recover. If the air
cools for more than 10 minutes, the machine does not automatically recover, please shut down and restart.
6) If you have any questions, please contact us at [e-mail].
3、LIFT-TIG mode:
Reboot MIG2100 for thin plates with higher welding process requirements or welding with higher process
requirements, especially for stainless steel welding, you can use the LIFT TIG mode, which requires the use of pure
argon.。
1、 Select “Lift TIG ” process.
2、 How to connect a tig torch
NOTE:tig torch and accessory are not included,you can buy from our store.