User Manual

Version Number: Mig210-20201221A1
10
2. Attach hose and regulator to gas bottle.
9、Installation of welding torch.
The welding wire should be extended outside the European central socket, and then install the welding torch.
The wire guide tube and contact tip of the welding torch need to match the welding wire. Press and hold the torch
switch wrench for more than 3 seconds to not weld. This is fast wire feeding. Let the welding wire be quickly delivered
to the gun head.
10、Remove consumables and depress trigger until wire comes out. Replace consumables.
11、Adjust wire feed speed, current and voltage
1. Choose MIG, MMA, LIFT-TIG working mode
2. Choose welding wire diameter 0.8/1.0mm, choose solid wire welding.
3. The machine has a unified function, so just adjust this knob the the welding current, voltage and wire
feeding speed are adjusted automatically at the same time.