User manual

- 9 -
Step 4: push the on/off switch on the back of the phone to the on side, then the phone’s LCD
screen displays “Initializing wait logon”. Later, a ready screen typically displays the date, time.
If your LCD screen displays different information from the above, you need refer to the next
section “Initial setting” to set your network online mode.
If your VoIP phone registers into corporate IP telephony Server, your phone is ready to use.
2.1.2. Power adaptor connection
Make sure that the power you use is comply with the parameters of power adaptor.
1. Plug power adaptor to power socket.
2. Plug power adaptor’s AC output to the AC5V port of WSS530 to start up.
3. There will be displayed black line and “initializing... wait logon...” on the screen. After
finishing startup, phone will show greeting, current date and time and so forth.
4. If phone has registered to the server, you can place or answer calls.
2.2. Basic Initialization
WSS530 is provided with a plenty of functions and parameters for configuration. User needs some
network and VoIP knowledge so that user could understand the meanings of parameters. In order
to make user use the phone more easily and convenient, there are basic configurations introduced
which is mandatory to ensure phone calls.
2.2.1. Network settings
Make sure that network is connected already before setting network of phone.WSS530 uses
DHCP to get WAN IP configurations, so phone could access to network as long as there is DHCP
server in it. If there is no DHCP server available, phone has to be changed WAN network setting
to Static IP or PPPoE.
Note: during setting network parameter in menu, Please don’t press the key, or else
the phone will not save the configuration and will return to standby interface.
Setting PPPoE mode (for ADSL connection)
1. Get PPPoE account and password first.
2. Press , and press twice, screen will show “Network”. Then press Soft2 (Enter)
or "OK", the LCD screen will display “WAN”.
3. Press Soft2 (Enter), then press , choose PPPoE.
4. Press Soft1 (Edit), the screen will display “Account”. The screen will show the current account
information. Press Soft1 (Del) to delete it, then input your PPPoE account and press Soft2 (Save).
With “saved” displayed, screen will jump to password settings,