User Manual

Realtek UWB BG13 HMC User Guide_revC.doc
4
All Rights Reserved by Realtek Corp.
2. System Description
The UWB BG1 HMC module supports the following functions:
 Certified WUSB mode
 WiNet mode
 Support 53.3M, 80M, 106.7M, 160M, 200M, 320M, 400M, 480Mbps.
 Support BG1, BG3 and TFC1~TFC10
The module system mainly consists of two main chips – (i) UWB
PHY(RTU7012), (ii) UWB MAC(RTU7305). A serial flash memory (2Mb)
is required to store proper data/commands for the PHY chip and MAC chip.
To make the system work properly, the Flash should be loaded with proper
content by using the Flash utility provided by Realtek.
The RF performance can also be tested using the test utility provided by
RealTek. Two basic clock frequencies are used in the system – 12MHz for
MAC and 66MHz for PHY. Some more details of the components are shown
in the following sections.
Product Specification
Frequency Band BG1 3168MHz ~ 4752MHz
BG3 6336MHZ ~ 7920MHz
Network Standard WiMedia PHY 1.2 & MAC 1.0
Modulation Mode Multiband OFDM with QPSK, DCM
FEC Coding Rate 1/3, 1/2, 5/8, 3/4 Convolutional Coding, Reed
Solomon Coding
Support Data Rate 8 data rates from 53.3Mbps to 480 Mbps
Interface
PCIe half mini card interface
Support Applications Certified WUSB, WiNet