User's Manual

should be loaded with proper content by using the Flash utility provided by

RealTek.

The RF performance can also be tested using the test utility provided by

RealTek. One basic clock frequencies are used in the system –66MHz. Some

more details of the components are shown in the following sections. The

system block diagram is shown below.

Figure 1 System Block Diagram

Product Specification

Frequency Band 3168MHz ~ 4752MHz

Network Standard WiMedia PHY 1.1 & MAC 1.0. Support PHY 1.2

Modulation Mode Multiband OFDM with QPSK, DCM

FEC Coding Rate 1/3, 1/2, 5/8, 3/4 Convolution

al Coding, Reed

Solomon Coding

Support Data Rate 8 data rates from 53.3Mbps to 480 Mbps

Interface USB 2.0 full-speed (12Mbps) and high-speed

(480Mbps) interface

Support Applications Certified WUSB