User's Guide
Table Of Contents
- About this guide
- Chapter 1. Meet your computer
- Chapter 2. Get started with your computer
- Chapter 3. Explore your computer
- Chapter 4. Help and support
- Appendix A. Accessibility and ergonomic information
- Appendix B. Compliance information
- Appendix C. Notices and trademarks
Rear
Figure 9. Rear view - ThinkBook 14p G2 ACH
1. Ventilation slots (outlet) Maintain the outgoing airflow to dissipate internal heat.
Note: Do not block the ventilation slots. Otherwise, the computer
may overheat.
2. microSD card slot Insert a microSD card into the slot for data transfer or storage.
3. USB (3.1 Gen 2) Type-A connector Connect to a USB-compatible device, such as a USB keyboard, a
USB mouse, a USB storage device, or a USB printer.
4. USB (3.1 Gen 2) Type-A connector
(always-on)
The always-on connector can charge external devices when the
computer is turned off, in sleep or hibernation mode. The always-on
function can be turned on or off in the UEFI/BIOS setup utility.
Note: If Lenovo Vantage is pre-installed on your computer, you can
also set always-on function within that software.
5. HDMI
™
connector
Connect to a compatible digital audio device or video monitor, such
as an HDTV.
Figure 10. Rear view - ThinkBook 16p G2 ACH
1. Ventilation slots (outlet) Maintain the outgoing airflow to dissipate internal heat.
Note: Do not block the ventilation slots. Otherwise, the computer
may overheat.
2. USB (3.1 Gen 2) Type-A connector Connect to a USB-compatible device, such as a USB keyboard, a
USB mouse, a USB storage device, or a USB printer.
3. USB (3.1 Gen 2) Type-A connector
(always-on)
The always-on connector can charge external devices when the
computer is turned off, in sleep or hibernation mode. The always-on
function can be turned on or off in the UEFI/BIOS setup utility.
Note: If Lenovo Vantage is pre-installed on your computer, you can
also set always-on function within that software.
4. Power connector Connect to power with the included power cord and ac power
adapter.
Chapter 1. Meet your computer 9