User's Guide
Table Of Contents
- About this guide
- Chapter 1. Meet your computer
- Chapter 2. Get started with your computer
- Chapter 3. Explore your computer
- Chapter 4. Help and support
- Appendix A. Accessibility and ergonomic information
- Appendix B. Compliance information
- Appendix C. Notices and trademarks
Base
1. Charging light Indicate whether the computer is connected to ac power.
• Solid white: Connected to ac power; battery capacity 80%–100%
• Solid amber: Connected to ac power; battery capacity 0%–79%
• Off: Not connected to ac power
2. Wireless antennas Send and receive radio waves for the built-in wireless LAN (local area
network) and Bluetooth module.
Note: The antennas are not visible from the outside of the computer.
3. Power button/Fingerprint reader
• Press the button to turn on the computer or put the computer into
sleep mode.
• Enroll and read your fingerprint for user authentication.
4. Power light Indicate the power status of the computer. The color of the power
light also reflects the currently activated performance mode. Refer to
“Set performance mode” on page 18 for how to switch performance
modes.
• Solid on: The computer is turned on.
– White: in balance mode
– Red: in performance mode
– Blue: in quiet mode
• Blinking: The computer is in sleep mode.
• Off: The computer is turned off or in hibernation mode.
5. Numeric keypad To enable or disable the numeric keypad, press the Num Lock key.
2 User Guide