RTL8723DE User’s Manual RTL8723DE PCI-Express NGFF1630-S2-E User’s Manual Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel.: +886-3-578-0211. Fax: +886-3-577-6047 www.realtek.com.
RTL8723DE User’s Manual Installing the Wireless PCIe NGFF1630 module Hardware Step . Shut down the computer. Step . Installing PCIe NGFF module to PCIe NGFF connector.
RTL8723DE User’s Manual Step . Connect two external Wi-Fi antennas on I-PEX connectors. step%. Power on the computer.
RTL8723DE User’s Manual Un-installing the Wireless PCIe NGFF1630 module Hardware Step . Shut down the computer. Step . Remove external Wi-Fi Antennas from the Wireless PCIe NGFF module board. Step .
RTL8723DE User’s Manual NGFF connector port. Step %. Power on the computer. Installing the Wireless PCIe NGFF1630 module Software Before you proceed with the installation, please notice following descriptions. Note1: The following installation was operated under Windows 7. Note2: If you have installed the WLAN driver & utility before, please uninstall the old version first.
RTL8723DE User’s Manual program from the CD. A. Insert the Installation CD to your CD-ROM Drive. Execute the “setup” Program, Click “Next” to process the installation B.
RTL8723DE User’s Manual C. Click Install this driver software anyway D. After step “C” please press Next button. E. Please click “YES” to install BT package.
RTL8723DE User’s Manual F. Please click “下一步”to continue. G. Please click “下一步”to continue.
RTL8723DE User’s Manual H. Please click “安装”to start installation. I. Please click “完成”to finish the installation.
RTL8723DE User’s Manual J.
RTL8723DE User’s Manual Un-installing the Wireless PCIe NGFF1630 module Software If you install Realtek11n Single Chip PCIE WLAN NIC Mass production kit into your laptop computer after installing the software program from the CD. When you install Realtek11n Single Chip WLAN PCIE NGFF1630 Adapter, the following dialog will be shown. A.
RTL8723DE User’s Manual Installing the Bluetooth USB Module Software A. Insert the NGFF1630 card into system connector. B. Boot on system then the “Geniric Bluttooth Adapter” device will show up in device manager. C. Click right button on “RT Bluetooth Radio” and select “Update Driver”.
RTL8723DE User’s Manual D. After select “Update Driver Software ” then the Hardware Update Wizard will pop up, please select “Browse my computer for driver software” and press Next button. E. After step “D” please Select “Let me pick from a list of device drivers on my computer ”.
RTL8723DE User’s Manual F. Finish step “E” then select “Have Disk..” G. Now select browse to find the driver for device and press Next button.
RTL8723DE User’s Manual
RTL8723DE User’s Manual H. Then click “Install this driver software anyway” to continue. I. Press close button to complete the install process and you can see the Driver will be show up in Device Manager.
RTL8723DE User’s Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
RTL8723DE User’s Manual IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 13. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated.
RTL8723DE User’s Manual Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device French translation: Ce dispositif est conforme aux CNR d'IndustrieCanada applicable aux appareils radio exempts de licence.
RTL8723DE User’s Manual French translation: NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles) Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. For product available in the Canada market, only channel 1~13 can be operated.
RTL8723DE User’s Manual LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains IC : 6317A-RTL8723DE ". The Host Model Number (HMN) must be indicated at any location on the exterior of the end product or product packaging or product literature which shall be available with the end product or online.
RTL8723DE User’s Manual 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停 用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 本模組於取得認證後將依規定於模組本體標示審合格籤。 系統廠商應於平台上標示「本產品內含射頻模組： XXXyyyLPDzzzz-x (NCC ID) 」字樣。 Japan Statement Host system must be labeled with "Contains MIC ID:xxxxxx“, MIC ID displayed on label
