User's Manual

Document Number: UM0058
_______________________________________________________________
March 8, 2016 8
 JTAG: GPIOE_[0..4]
5.1 Pin function table setup
 Multiple functions are supported by group setup.
 For example: GPIOA_6(Rx), GPIOA_7(Tx), GPIOA_3(RTS) and GPIOA_5(CTS)
are used if UART0 function. GPIOA_3(RTS) and GPIOA_5(CTS) can not be
used as other functions.
 For example: GPIOC_0, GPIOC_1, GPIOC_2, GPIOC_2, GPIOC_3 are used if
PWM is occupied. GPIOC_1(PWM1) and GPIOC_2(PWM2) can not be
used as other functions.
6 Hardware configuration
6.1 CMSIS-DAP
RTL-AMEBA_DEV01 supports CMSIS-DAP debugger. It requires installing “serial to
USB driver”at first. Serial to USB driver can be found in
tools\serial_to_usb\mbedWinSerial_16466.
Connect board to the PC with micro-USB cable.