User's Manual
145
T
The LCD screen is too dark or too
bright.
A 7XUQRQWKH/&'EDFNOLJKWRUDGMXVW
thescreenbrightness.
Press Fn +
# to turn on the LCD
EDFNOLJKWRUpress Fn +
# , Fn +#
to adjust the screen brightness.
T
The screen saver disturbs screen
viewing during Media Player or
YLGHR¿OHRSHUDWLRQ
$Ź)RU:LQGRZV
Unselect Library > More Options
> Player > Allow screen saver
during playback in the Media
Player.
Ź)RU:LQGRZV;3
&OLFNTools > Options > Player and
then clear the Allow screen saver
during playback in the Media
CenterFKHFNER[
T
In the following cases, the screen
blinks or there is noise for a short
time.
} Click the Graphics Related tab,
Change Resolution, Change
Display Device, Remove the AC
Adapter, Restart the System,
Change Power Scheme.
A This may happen while the video
driver is examining the connected
device. While the detection process is
busy, any connected display devices
PD\EOLQNRUVRPHQRLVHPD\RFFXU
T
When I connect an external
display and change the settings
to display the screen image on
both the LCD and the external
display by pressing the Fn +
key combination, the screen is not
displayed properly.
A Press Fn +
# NH\FRPELQDWLRQ
again. If the screen is still not
displayedoronlypartofthescreen
is displayed by doing this, that means
theLCDresolutionistoolowortoo
wide and the external display does not
support the resolution.
Display Related