User's Manual
106
3
Enter a password, press <Enter>, re-
HQWHUWKHSDVVZRUGIRUFRQ¿UPDWLRQ
and press <Enter> again.
The password can be up to 8
alphanumeric characters. Special
characters are not allowed.
4
:KHQDPHVVDJHFRQ¿UPLQJWKH
SDVVZRUGFRQ¿JXUDWLRQDSSHDUVLQ
the Setup Notice window, press
<Enter>.
The supervisor password has been
set.
Thesupervisorpasswordisrequired
toturnthecomputeronortoenterthe
BIOS Setup.
Setting a User Password
TheUserPasswordrestrictsaccess
WRWKHFRPSXWHURUIRUFRQ¿JXULQJWKH
%,266HWXSOLNHD6XSHUYLVRU3DVVZRUG
However,theSetupitemsthatcan
EHFRQ¿JXUHGZLWKD8VHU3DVVZRUG
DUHUHVWULFWHGXQOLNHIRUD6XSHUYLVRU
Password.
%HIRUHFRQ¿JXULQJDXVHUSDVVZRUGD
supervisor password must have been
FRQ¿JXUHG'HDFWLYDWLQJWKHVXSHUYLVRU
password also deactivates the user
password.
In the Set User Password item, press
<Enter> and complete the procedures
from Step 3 of Setting a Supervisor
Password.
Setting Up a Boot Password
Tosetupabootpassword,the
administrator password (Set Supervisor
Password)shouldbesetinadvance.
Set the Password on boot item to
Enabled.
Onceabootpasswordisset,youhave
to enter the password to boot up the
computer.