User's Manual

Note:

If the new PCI Express Mini Card has two connectors, as in the next drawing,

be sure to attach the gray cable to the connector marked "MAIN" on the card, and the

black cable to the connector marked "AUX". Put the white cable in the cable protection

tube.

Pivot the card until you can snap it into place by pressing the upper side of the

connectors

(1)

, and secure the card with the two screws

(2)

. Connect the cables to the

new PCI Express Mini Card.

Note:

Be sure to attach the gray cable to the connector marked "MAIN" on the card,

the white cable to the connector marked "MIMO", and the black cable to the connector

marked "AUX".

10.

Put the memory slot cover back in place

(1)

, close the cover

(2)

, and then tighten the

screw

(3)

6/7 ページ(T400s) Installing and replacing a PCI Express Mini Card for wireless LAN/WiMAX ...

2009/03/02file://C:\TamaTemp\REPLPCI_sn1.HTM\REPLPCI_sn1.HTM