Getting Started HP Notebook
© Copyright 2011 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Welcome .......................................................................................................................................................... 1 What's new? ......................................................................................................................................... 2 Beats Audio ......................................................................................................................... 2 Finding information ...................
Navigating ......................................................................................................... 21 Selecting ........................................................................................................... 21 Using TouchPad gestures ................................................................................. 22 Scrolling ............................................................................................ 22 Pinching/Zooming .......................................
1 Welcome ● What's new? ● Finding information After you set up and register the computer, it is important to take the following steps: ● Set up HP QuickWeb—Immediately access the Internet, widgets, and communication programs without launching your main operating system. For more information, refer to HP QuickWeb on page 13. ● Connect to the Internet—Set up your wired or wireless network so that you can connect to the Internet. For more information, refer to Networking on page 14.
What's new? Beats Audio Beats Audio is an enhanced audio profile that provides a deep, controlled bass while maintaining a clear sound. Beats Audio is enabled by default. ▲ To increase or decrease the Beats Audio bass settings, press fn+b. Select Start > Control Panel > Hardware and Sound > Beats Audio. The following table describes the Beats Audio icons that appear when you press fn+b. Icon Description Indicates that Beats Audio is enabled. Indicates that Beats Audio is disabled.
Finding information The computer comes with several resources to help you perform various tasks. Resources For information about Quick Setup poster ● How to set up the computer ● Help to identify computer components Getting Started ● Computer features To access this guide: ● How to connect to a wireless network Select Start > Help and Support > User Guides. ● How to use the keyboard and pointing devices – or – ● Select Start > All Programs > HP > HP Documentation.
Resources For information about Worldwide Telephone Numbers booklet HP support telephone numbers This booklet is provided with your computer. HP Web site ● Support information To access this Web site, go to http://www.hp.com/ support. ● Ordering parts and finding additional help ● Software, driver, and BIOS updates ● Accessories available for the device Limited Warranty* Warranty information To access the warranty: Select Start > Help and Support > User Guides > View Warranty Information.
2 Getting to know your computer ● Top ● Front ● Right side ● Left side ● Display ● Bottom Top TouchPad Reviewers: please confirm. Component (1) Description TouchPad light ● White: The TouchPad is on. ● Amber: The TouchPad is off. (2) TouchPad on/off button Quickly double-tap the TouchPad on/off button to turn the TouchPad on or off. (3) TouchPad zone Moves the pointer and selects or activates items on the screen.
Lights Component (1) (2) (3) 6 Description Power light Mute light Wireless light ● White: The computer is on. ● Blinking white: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation. ● Amber: Computer sound is off. ● Off: Computer sound is on. ● White: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on. ● Amber: All wireless devices are off. (4) Caps lock light On: Caps lock is on.
Buttons Component (1) Description Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep. ● When the computer is in Hibernation, press the button briefly to exit Hibernation.
Keys Component Description (1) Action keys Execute frequently used system functions. (2) fn key Executes frequently used system functions when pressed in combination with a function key, the num lk key, or the esc key. (3) Windows logo key Displays the Windows Start menu. (4) Windows applications key Displays a shortcut menu for items beneath the pointer. Front Component Speakers (2) 8 Chapter 2 Getting to know your computer Description Produce sound.
Right side Component (1) Description Digital Media Slot Supports the following digital card formats: ● MultiMediaCard ● Secure Digital (SD) Card ● Secure Digital High Capacity Card (SDHC) ● Secure Digital Extended Capacity (SDxC) Supports mini versions by use of an adapter (adapter is not included). (2) Audio-out (headphone) jack Produces sound when connected to optional powered stereo speakers, headphones, earbuds, a headset, or television audio.
Left side Component Description (1) External monitor port Connects an external VGA monitor or projector. (2) Power connector Connects an AC adapter. (3) AC adapter light ● White: The computer is connected to external power and the battery is fully charged. ● Amber: The computer is connected to external power and the battery is charging. ● Off: The computer is not connected to external power. (4) Vent Enables airflow to cool internal components.
Display Component Description (1) WLAN antennas (2) Send and receive wireless signals to communicate with wireless local area networks (WLAN). (2) WWAN antennas (2) Send and receive wireless signals to communicate with wireless wide-area networks (WWAN). (3) Internal microphone Records sound. (4) Webcam Records video and captures still photographs. To use the webcam, select Start > All Programs > CyberLink YouCam > CyberLink YouCam. (5) Webcam light On: The webcam is in use.
Bottom Graphic is being revised. This will be deleted. There is no latch here. Component 12 Description (1) Battery bay Holds the battery. (2) Battery/service access cover latch Releases the battery from the battery bay and the service access cover from the computer.
3 HP QuickWeb ● Starting HP QuickWeb The HP QuickWeb environment provides a fun and engaging way to perform many of your favorite activities. Your computer is ready to go within seconds of starting QuickWeb, allowing you to rapidly access the Internet, widgets, and communication programs. Simply press the QuickWeb key (or QuickWeb button on select models), and then start browsing the Internet, communicating with Skype, and exploring other HP QuickWeb programs.
4 Networking ● Using an Internet service provider (ISP) ● Connecting to a wireless network NOTE: Internet hardware and software features vary depending on computer model and your location. Your computer may support one or both of the following types of Internet access: ● Wireless—For mobile Internet access, you can use a wireless connection. Refer to Connecting to an existing WLAN on page 15 or Setting up a new WLAN network on page 15.
Connecting to a wireless network Wireless technology transfers data across radio waves instead of wires.
Configuring a wireless router For help in setting up a WLAN, refer to the information provided by your router manufacturer or your ISP. The Windows operating system also provides tools to help you set up a new wireless network. To use the Windows tools to set up your network, select Start > Control Panel > Network and Internet > Network and Sharing Center > Set up a new connection or network > Set up a new network. Then follow the on-screen instructions.
5 Keyboard and pointing devices ● Using the keyboard ● Using pointing devices Reviewers: Please confirm the hotkeys and functionality. Using the keyboard Identifying the hotkeys A hotkey is a combination of the fn key (1) and either the esc key (2), or the b key (3). Graphic is being revised. The icons, lines and rectangle around these keys will be deleted. Bubble 3 will point to the "b" key.
Reviewers: Please review action keys and functionality. Using the action keys Action keys are customized actions that are assigned to specific keys at the top of the keyboard. The icons on the f1 through f12 keys represent the action key functions. To use an action key, press and hold this key to activate the assigned function. NOTE: The action key feature is enabled at the factory.
Icon Key Description f11 Mutes or restores speaker sound. f12 Turns the wireless feature on or off. NOTE: This key does not establish a wireless connection. To establish a wireless connection, a wireless network must also be set up.
Using pointing devices NOTE: In addition to the pointing devices included with your computer, you can use an external USB mouse (purchased separately) by connecting it to one of the USB ports on the computer. Setting pointing device preferences Use Mouse Properties in Windows to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties, select Start > Devices and Printers.
Navigating To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go. Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse.
Using TouchPad gestures The TouchPad supports a variety of gestures. To use TouchPad gestures, place two fingers on the TouchPad at the same time. NOTE: TouchPad gestures are not supported in all programs. To view the demonstration of a gesture: 1. Click the Show hidden icons icon in the notification area, at the far right of the taskbar. 2. Right-click the Synaptics Pointing Device icon 3. Click a gesture to activate the demonstration. , and then click TouchPad Properties.
Pinching/Zooming Pinching allows you to zoom in or out on images or text. ● Zoom in by placing two fingers together on the TouchPad, and then moving them apart. ● Zoom out by placing two fingers apart on the TouchPad, and then moving them together. NOTE: Pinching/zooming is enabled at the factory. Rotating Rotating allows you to rotate items such as photos. To rotate, anchor your left forefinger in the TouchPad zone.
6 Maintenance ● Inserting or removing the battery ● Replacing or upgrading the hard drive ● Replacing the memory module Inserting or removing the battery NOTE: For additional information on using the battery, refer to the HP Notebook Reference Guide. Inserting the battery To insert the battery: ▲ 24 Insert the battery (1) into the battery bay and rotate it downward (2) until it is firmly seated.
Removing the battery To remove the battery: CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work and initiate Hibernation or shut down the computer through Windows before removing the battery. 1. Slide the battery/service access cover latch (1) to release the battery. 2. Pivot the battery (2) upward and lift it out of the computer (3).
Replacing or upgrading the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. Removing the hard drive 26 1.
8. Pull up on the hard drive tab (3) and slide the hard drive (4) out of the hard drive bay. Installing the hard drive 1. Insert the rubber bumpers on the drive into the slots (1) on the hard drive bay. 2. Lower the hard drive (2) into the hard drive bay. 3. Replace the Phillips screw (3). 4. Connect the hard drive connector (4) to the computer.
28 5. Lower the service access cover onto the computer (1) and then slide the cover (2) toward the battery bay until the battery/service access cover latch snaps into place. 6. Replace the battery. 7. Reconnect external power and external devices. 8. Turn on the computer.
Replacing the memory module The computer has one memory module compartment. The capacity of the computer can be upgraded by upgrading the existing memory module in the memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components.
6. Insert the new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c.
7 Backup and recovery ● Restore ● Creating restore media ● Performing a system restore ● Backing up and recovering your information Your computer includes tools provided by the operating system and HP to help you safeguard your information and restore it if ever needed.
NOTE: If your computer does not include an integrated optical drive, you can use an optional external optical drive (purchased separately) to create recovery discs, or you can purchase recovery discs for your computer from the HP Web site. If you use an external optical drive, it must be connected directly to a USB port on the computer, not to a USB port on an external device, such as a USB hub. Guidelines: ● Purchase high-quality DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs.
To restore the computer from the recovery partition, follow these steps: 1. Access HP Recovery Manager in either of the following ways: ● Select Start > All Programs > HP > HP Recovery Manager > HP Recovery Manager. – or – ● Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Then, press f11 while the “F11 (System Recovery)” message is displayed on the screen. 2.
NOTE: A recovery from your most recent backup needs to be performed if the computer has a virus attack or if any major system components fail. In order to correct computer issues, a recovery should first be attempted before a system restore is attempted. You can back up your information to an optional external hard drive, a network drive, or discs. Back up your system at the following times: ● At regularly scheduled times TIP: Set reminders to back up your information periodically.
Using Windows system restore points A system restore point allows you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes. NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point. You also can create additional restore points to provide increased protection for your files and settings.
8 Customer support ● Contacting customer support ● Labels Contacting customer support If the information provided in this user guide, in the HP Notebook Reference Guide, or in Help and Support does not address your questions, you can contact HP Customer Support at: http://www.hp.com/go/contactHP NOTE: For worldwide support, click Contact HP worldwide on the left side of the page, or go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Here you can: ● Chat online with an HP technician.
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer: ● Serial number label—Provides important information, including the following: Component (1) Product name (2) Serial number (s/n) (3) Part number/Product number (p/n) (4) Warranty period (5) Model description Have this information available when you contact technical support. The serial number label is affixed to the bottom of the computer.
9 Specifications ● Input power ● Operating environment Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz.
Operating environment Factor Metric U.S.
Index A AC adapter light, identifying 10 action keys decrease screen brightness 18 Help and Support 18 identifying 8 increase screen brightness 18 next track 18 play, pause, resume 18 previous track 18 stop 18 switch screen image 18 volume down 18 volume mute 19 volume up 18 wireless 19 audio-in (microphone) jack 9 audio-out (headphone) jack 9 B backing up customized window, toolbar, and menu bar settings 34 personal files 34 bass settings hotkey 17 battery bay 37 battery bay, identifying 12 battery, insert
N network jack, identifying 9 O operating environment 39 operating system Microsoft Certificate of Authenticity label 37 Product Key 37 P pinching TouchPad gesture 23 pointing devices, setting preferences 20 ports external monitor 10 USB 9, 10 power button, identifying 7 power connector, identifying 10 power light, identifying 6 Product Key 37 product name and number, computer 37 Q QuickWeb Home Screen 13 starting 13 QuickWeb button 7 QuickWeb software 13 R recovering from the dedicated recovery partition
Regulatory, Safety and Environmental Notices User Guide
© Copyright 2008–2011 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. ENERGY STAR is a registered mark owned by the U.S. government. Java is a trademark of Sun Microsystems. Microsoft, Windows, and Windows Vista are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice.
Table of contents 1 Regulatory notices .......................................................................................................................................... 1 Federal Communications Commission notice ...................................................................................... 2 Modifications ........................................................................................................................ 2 Cables ..........................................................
New Zealand modem statements ...................................................................................... 15 Voice support .................................................................................................... 16 Power cord notice ............................................................................................................................... 16 Japan power cord notice ....................................................................................................
1 Regulatory notices This guide provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near explosives, in hazardous locations, and so on.
Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Declaration of Conformity for products marked with the FCC logo (United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. If you have questions about the product that are not related to this declaration, write to Hewlett-Packard Company P. O.
Brazil notice Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. Este equipamento atende aos limites de Taxa de Absorção Específica referente à exposição a campos elétricos, magnéticos e eletromagnéticos de radiofreqüências adotados pela ANATEL.
For non-telecommunications products and for EU harmonized telecommunications products, such as Bluetooth®, within power class below 10 mW. For EU non-harmonized telecommunications products (if applicable, a 4-digit notified body number is inserted between CE and ! (the exclamation mark). Please refer to the regulatory label provided on the product.
with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR of the device while operating can be well below the maximum value, because the device operates at multiple power levels and uses only the power required to reach the network. When installed in the notebook computer, this device meets RF exposure guidelines when the antennas are positioned at a minimum distance from the body.
Japan notices Wireless LAN 802.11b devices Wireless LAN 802.
Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. South Korea notice Mexico notice La operación de este equipo está sujeta a las siguientes dos condiciones: (1) este equipo puede que no cause interferencia y (2) este equipo debe aceptar cualquier interferencia, incluyendo interferencia que pueda ser causada por la operación no deseada. Singapore wireless notice Turn off any WWAN devices while you are onboard aircraft.
Taiwan notices Wireless LAN 802.11a devices Wireless LAN 802.11b devices Vietnam Compliance Marking Notice This marking is for applicable products only.
Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. Battery notices WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. For information about removing a battery, refer to the user guide included with the product.
Laser compliance WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation: Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide.
U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C.
Modem notices 13
14 Chapter 1 Regulatory notices
Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0.
Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party.
2 Safety notices Heat-related safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
Power cord notices WARNING! To reduce the risk of electric shock or damage to the equipment: Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter.
3 Environmental notices This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle.
China material content declarations The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products Toxic and Hazardous Substances and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Battery X O O O O O Cables X O O O O O Camera X O O O O O Chassis/Other X O O O O O Flas
Toxic and Hazardous Substances and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Liquid crystal display (LCD) panel X X O O O O Media (CD/DVD/floppy) O O O O O O Memory X O O O O O Motherboard, processor, heat sinks X O O O O O Mouse X O O O O O Optical disk drive X O O O O O Optional docking device X O O O O O Power adapter X O O O O O Power supply
Japan material content declaration A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide material content declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, see the HP Web site at http://www.hp.com/go/jisc0950.
Ukraine Restriction of Hazardous Substances The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
Index A airline travel notice 10 B battery notice 10, 17, 23 battery recycling 19 Brazil notice 4 C cable grounding notice 18 Canada modem statement 15 Canada notices 4 Canadian French notices 4 China Material Content Declarations 20 D DC plug of external HP power supply notice 16 Declaration of Conformity 3 disposal notices battery 10, 23 equipment 19 mercury 23 E electronic hardware and battery recycling 19 ENERGY STAR compliance 10 environmental notices 19 equipment disposal notice 19 ergonomics notice
U U.S.
