User's Manual
Table Of Contents
- Chapter 1. Tips
- 1-1. Read this carefully before using the Notebook PC.
- 1-2. Important safety information
- ▶ Installation
- ▶ Using Battery
- ▶ Using AC Adapter
- ▶ Using Notebook PC
- ▶ Upgrading Notebook PC
- ▶ Carrying Notebook PC
- ▶ Safety Notes to Prevent Data Loss (HDD Management)
- ▶ Safety Precaution for Windows Vista Capable PC Use
- ▶ When using the computer, sit in the good posture as shown below.
- ▶ Adjusting volume (headset and speakers)
- ▶ System Protection Feature
- Chapter 2. Notebook PC Tour
- Chapter 3. Using the system
- Chapter 4. Input/Output Device
- Chapter 5. Connecting Peripherals
- Chapter 6. System Setup
- Chapter 7. Restoring the System
- Chapter 8. Reinstalling the Driver
- Chapter 9. Using the Internet
- Chapter 10. Auxiliary Storage/Memory
- Chapter 11. Appendix
80
System Setup
4.
When the password confirmation message appears, enter the password again and press
[
Enter
]
.
5.
To save the changes in system setup, press
[
F10
]
.
6.
When the following message appears, select
[
Ye s
]
and press
[
Enter
]
. The notebook PC will restart.
▶
User Password
The password set in the
User Password
menu is lower than that set in the
Supervisor Password
menu, and
so the user can use the
User Password
only after setting a password in the
Supervisor Password
menu.
1.
After opening the system setup screen, use the arrow keys to move to Security.
2.
When the following screen appears, select the
User Password
item with the arrow keys and press
[
Enter
]
.
■ Supervisor Password has the privilege to set all the entries in CMOS Setup. It is
recommended to use User Password if people other than you use the system.