User's Manual
Table Of Contents
- Chapter 1. Tips
- 1-1. Read this carefully before using the Notebook PC.
- 1-2. Important safety information
- ▶ Installation
- ▶ Using Battery
- ▶ Using AC Adapter
- ▶ Using Notebook PC
- ▶ Upgrading Notebook PC
- ▶ Carrying Notebook PC
- ▶ Safety Notes to Prevent Data Loss (HDD Management)
- ▶ Safety Precaution for Windows Vista Capable PC Use
- ▶ When using the computer, sit in the good posture as shown below.
- ▶ Adjusting volume (headset and speakers)
- ▶ System Protection Feature
- Chapter 2. Notebook PC Tour
- Chapter 3. Using the system
- Chapter 4. Input/Output Device
- Chapter 5. Connecting Peripherals
- Chapter 6. System Setup
- Chapter 7. Restoring the System
- Chapter 8. Reinstalling the Driver
- Chapter 9. Using the Internet
- Chapter 10. Auxiliary Storage/Memory
- Chapter 11. Appendix
System Setup
79
6-2. Setting the Password
This process is to set a password so that other people cannot use the notebook PC or change the settings.
The user can set a password while booting the system or setting up the system.
▶
Supervisor password
The password prevents unauthorized people from accessing the notebook PC. By default, no password.is set for the machine.
In case an unauthorized person changes the CMOS setup while the notebook PC is on, a password will be set and the user
will be denied from the access to the system.
1.
After opening the system setup screen, use the arrow keys to move to
Security
.
2.
When the following screen appears, select
Supervisor Password
with the arrow keys and press
[
Enter
]
.
3.
When the following message appears, input the password and press
[
Enter
]
. The password must not exceed 6 characters of
letter (A~Z), number (0~9) or their combination.
■
Without the registered password, if any, access to the system will be denied. Write down and keep the
password in a safe place.