User's Manual
Table Of Contents
- Chapter 1. Tips
- 1-1. Read this carefully before using the Notebook PC.
- 1-2. Important safety information
- ▶ Installation
- ▶ Using Battery
- ▶ Using AC Adapter
- ▶ Using Notebook PC
- ▶ Upgrading Notebook PC
- ▶ Carrying Notebook PC
- ▶ Safety Notes to Prevent Data Loss (HDD Management)
- ▶ Safety Precaution for Windows Vista Capable PC Use
- ▶ When using the computer, sit in the good posture as shown below.
- ▶ Adjusting volume (headset and speakers)
- ▶ System Protection Feature
- Chapter 2. Notebook PC Tour
- Chapter 3. Using the system
- Chapter 4. Input/Output Device
- Chapter 5. Connecting Peripherals
- Chapter 6. System Setup
- Chapter 7. Restoring the System
- Chapter 8. Reinstalling the Driver
- Chapter 9. Using the Internet
- Chapter 10. Auxiliary Storage/Memory
- Chapter 11. Appendix
Using the system
37
3-2. Charging Battery with AC Adapter
Notebook PC runs on AC power or battery.
This section describes the procedure that the user should take initially for a new system.
The provided AC adapter can be used on voltage between 100V and 240V.
1.
Connect the AC adapter to a power outlet with the power cable.
2.
Connect the AC adapter to the power port of the notebook PC.
1.
AC Adapter
2.
Power cable
3.
Adjust the LCD panel to the most comfortable angle.
4.
Press the power button to turn on the machine.
■ You need a different plug to use the AC adapter on 110V. (The extra plug for 110V is sold
separately.)
Do not leave a liquid container on the computer.
■
The system may be short-circuited and damaged.
Please use an AC adapter certified by LG Electronics.
■
Otherwise, an explosion or fire may occur.
■
It may cause a problem in battery charging or system operation.