User's Manual
Table Of Contents
- Chapter 1. Tips
- 1-1. Read this carefully before using the Notebook PC.
- 1-2. Important safety information
- ▶ Installation
- ▶ Using Battery
- ▶ Using AC Adapter
- ▶ Using Notebook PC
- ▶ Upgrading Notebook PC
- ▶ Carrying Notebook PC
- ▶ Safety Notes to Prevent Data Loss (HDD Management)
- ▶ Safety Precaution for Windows Vista Capable PC Use
- ▶ When using the computer, sit in the good posture as shown below.
- ▶ Adjusting volume (headset and speakers)
- ▶ System Protection Feature
- Chapter 2. Notebook PC Tour
- Chapter 3. Using the system
- Chapter 4. Input/Output Device
- Chapter 5. Connecting Peripherals
- Chapter 6. System Setup
- Chapter 7. Restoring the System
- Chapter 8. Reinstalling the Driver
- Chapter 9. Using the Internet
- Chapter 10. Auxiliary Storage/Memory
- Chapter 11. Appendix
34
Using the system
3-1. Running on Battery
Notebook PC runs on AC power or battery. This section describes the procedure that the user should take initially for a new
system. The provided AC adapter can be used on voltage between 100V and 240V.
Charge the new battery with the AC adapter before use.
Refer to
[
Charging Battery with AC Adapter
]
in User's Guide.
1.
Turn the machine over to see the battery pack chamber and equip the pack.
-
Insert the battery pack into the chamber as shown in the following figure and push it in the direction of the arrow until you hear a clicking
sound.
2.
Open the machine and turn the power on.
3.
Check the battery state.