GALOIS Instruction realsee.
Features of Galois • Detailed scanning of environmental Lidar Power light information • 8k pixels • Depth sensors • Solutions both indoor and outdoor • Scanning radius up to 10 metres ON/OFF button Fisheye lens
1 Setting Up Galois Shooting Process • • • Prepare the Device Prepare the Room Installation device
Setting Up Prepare the Device iPhone iPhone 7 or above APP Realsee VR APP Tripod 1.3 -1.
Setting Up Prepare the Room for Shooting Clean up the room Turn on all lights Open all doors The narrow space needs to open 45° Tips: pay attention to the storage of private items.
Setting Up Installation device ① The tripod should be set at 1.3 meters ② Attach the camera to the tripod and twist until it does not wobble, but do not twist too hard Tips: when mounting, hold the camera with both hands and gradually fix it to the tripod.
2 Capturing a Space • Galois Shooting Process • • • • • Creating a new project Connection of camera Capture Point scanning Marking features Preview/Upload
Capturing a Space Creating a new project • Login to the Realsee App. • Tap on the blue capture icon. • Select to capture with Gimbal, enter the tour name and add a new tour.
Capturing a Space Connection of camera • Press and hold the on button for 2 seconds, then remove both front and side lens covers.
Capturing a Space Capture • You can start your scan at the entrance, front door area of a room or house. Or simply start from a relatively empty area • Move to the next scan point. Scan the whole room according to your path plan. • Once the data is generated, the point will turn blue and then move on to the next point. Red point: data being downloaded Blue point: data have been downloaded Note: Do not block the lens or radar during capturing.
Capturing a Space Point scanning • Starting with the first point, align the points using 'Manual Alignment' or ‘Auto Align’. Note: When aligning manually, choose an easily recognisable reference to make alignment easier. When capturing stairs, you will also need to align the height.
Capturing a Space Mark Features Add mark features in spaces with mirrors or glass. a. Cut point cloud: cut redundant point cloud in the horizontal direction b. Add window: add mirror feature where there is a window c. Add mirror: add mirror features where there is a mirror d.
Capturing a Space Preview/Upload • After shooting, preview to make sure that points are not missed and that points are aligned. Note: Once capturing is complete, you can leave the site and upload the data in an office or home Wi-Fi environment with good internet access.
3 Editing Galois Shooting Process • • APP editing Workshop editing
Editing APP editing • Info: edit Project name, VR tag, Address, Space introduction etc.
Editing WORKSHOP Editing • PC website: https://new-workshop.realsee.jp/ Note: Account and password are the same as logging into Realsee VR APP. • VR information: edit Project information, contact information, shooting information etc.
Editing WORKSHOP Editing • PC website: https://new-workshop.realsee.jp/ Note: Account and password are the same as logging into Realsee VR APP.
Thanks
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
