User Guide

Change bands
Slide the spring pin and hold it to remove a
band from the watch or attach a band to the
watch.
Safety Instructions
1. If you currently have any preexisting physical diseases, and using this product
may have an impact on this disease, please consult your doctor first;
2. Do not check the display information when driving, being distracted or in other
potentially dangerous situations;
3. This product is not a toy. Do not allow children or pets to play with this product.
Small components of the product may cause suocation;
4. The product function may be aected by external factors, so the data is for
reference only;
5. The product has a heart rate recording function.
Wearing it for a long time may cause some users to have skin discomfort and
allergic symptoms, or bring certain risks to users with certain diseases. Please
consult your doctor before using or stop using the product in any of the following
situations:
- Epilepsy or sensitive to light;
- Poor blood circulation or prone to have bruises; heart disease or other diseases;
- You are taking any light-sensitive drugs.
Disclaimer
EU Declaration of Conformity (DoC)
This product is not a medical device and should not be used as a substitute for
professional medical judgment. It is not designed or intended for use in the diagnosis
of disease or other conditions, or in the cure, mitigation, treatment, or prevention of
any condition or disease. Please consult your healthcare provider prior to making
any decisions related to your health.
Hereby, realme, declares that this device is in compliance with the essential
requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.
The declaration of conformity may be consulted at
https://www.realme.com/eu/support/declaration
Warnings
• Replacement of a battery with an incorrect type that can defeat a safeguard (for
example, in the case of some lithium battery types);
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of
a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment that
can result in an explosion or the leakage of flammable liquid or gas;
• A battery subjected to extremely low air pressure that may result in an explosion or
the leakage of flammable liquid or gas;
• Please charge with a special adapter;
• Do not swallow, dismantle, Pierce, ram, squeeze or throw into fire or the water;
• Do not continue to use if severe swelling occurs;
• Keep small cells and batteries which are considered swallowable out of the reach
of children;
• Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns
can occur within 2h of ingestion;
• In case of ingestion of a cell or battery, seek medical assistance promptly.
This symbol means that according to local laws and regulations your product
and/or its battery shall be disposed of separately from household waste.
When this product reaches its end of life, user has the choice to give his
product to a competent recycling organization. Proper recycling of your
product will protect human health and the environment.
Warranty
Matters Needing Attention:
Thank you for purchasing realme products. If any manufacturing defect problems
occur within 12 months from the date of purchase, user can enjoy our company's
warranty service.
1. When you buy the product, the sales unit will issue a valid proof of purchase;
2. The warranty card and the proof of purchase should be kept by the user properly,
and it will not be replaced if lost;
3. If the product fails due to non-human factors, the user can present the warranty
card and proof of purchase to the realme customer service center for free
maintenance during the warranty period.
Non-warranty situation:
This warranty does not cover the following cases:
1. Out of warranty period;
2. Damage caused by use not in accordance with the instructions;
3. Damage caused by man-made causes;
4. Failure caused by unauthorized disassembly, maintenance, or modification of the
product;
5. Damage caused by force majeure factors (such as floods, earthquakes, lightning,
etc.);
6. There is no warranty card, invoice, or warranty card that does not match the
invoice information;
7. The product wears naturally;
8. Other failures and damages that are not caused by the quality of the product itself.
Email : [e-mail]
Website : www.realme.com
Toll free : 1800 102 2777
FCC Statement
NOTE:
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference; and (2) This device must accept any
interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications or changes to this equipment. Such modifications or
changes could void the user's authority to operate the equipment.
FCC Caution
• Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful to part interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
FCC Radiation Exposure Statement
- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Parameters
Contents
Regulatory Information
Model: RMW2103
Frequency band of operation: 2402MHz-2480MHz
Bluetooth transmit power: ≤I0dBm(max)
Ingress protection level: IP68
Input rating: 5V 0.5A
Working temperature range: 0℃~45℃
Storage temperature range: -20℃ ~60℃
Smart watch
Charging base
User manual
To view regulatory information, please go to Settings - About - Regulatory Information
Enter pairing mode
Press and hold the power button on the side
to power on.
Download realme Fit
Search realme Fit in Google Play Store
(Android) or App Store (iOS), or scan the QR
code to download realme Fit.
Set up and pair
Tap the icon in realme Fit to add device.
Select realme TechLife Watch S100 in nearby
devices, or scan the QR code on the watch
screen to pair up with the watch.
On home screen
Swipe down to view notifications
Swipe up to browse applications
Swipe left to view function
Swipe right to view the status bar
Press and hold to change the watch face
Press once
Press and hold
Wake the watch
Pause or resume workout
Return to the previous screen in an app
Turn o the screen at home screen
Power on, o
about 15s force restart
To charge the watch, place the watch on the
charging base.
Make sure both metal pads on the back of
the watch are aligned with the metal tips on
the base.
Charging
User Guide
realme TechLife Watch S100 - 说明书 - 拉美
原印度版内容
变更/新增内容
规格：成型后92×75mm（左侧骑马钉）；四色+Pantone cool gray 6c；封面80g哑粉纸+单面印刷+正反面过哑油，内页80g哑粉纸+双面印刷+正反面过哑油。
1（封面） 2 3 4
5 6 7 8
9 10 11 12
正 反
Realme Chongqing Mobile Telecommunications Corp., Ltd.
No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China
FCC ID: 2AUYFRMW2103
13（封底）
Warranty Card (Customer Copy)
Dear user, thank you for using the product of our company. Please read and keep
properly the warranty card after purchasing the product so that we can provide
better services to you.
User's name Phone Number
Address
Email
Product Model
User Information
Product Information
Sales Information
Product Serial Number
Purchase Date Invoice Number
Sales Unit
Phone Number
Address
Warranty Card (Stub Copy)
Dear user, thank you for using the product of our company. Please read and keep
properly the warranty card after purchasing the product so that we can provide
better services to you.
User's name Phone Number
Address
Email
Product Model
User Information
Product Information
Sales Information
Product Serial Number
Purchase Date Invoice Number
Sales Unit
Phone Number
Address