Replacement Part List
Table Of Contents
- CONTENT
- 3. PRODUCT OVERVIEW
- Warning Sign on the Device
- 5. GENERAL SAFETY INSTRUCTIONS
- Here there is a Danger of Death
- Here there is Danger of Injury
- 7. OPERATION INSTRUCTIONS
- 7.2 Mounting of high pressure hose
- A
- 7.3 Mounting of lance and nozzle
- 7.4 Water connection
- 7.5 Start/stop of the machine
- 7.6 Adjustable Nozzle
- 7.8 Angle Nozzle (optional)
- 7.9 Patio Cleaner (optional)
- 7.7 High pressure detergent bottle
- 9. INSTRUCTIONS FOR USE
- 8. CONNECTION REQUIREMENTS
- 8.1 Electrical connection
- 8.2 Extension Lead
- 8.3 Water Connection
- 9.2 Water
- 9.3 Bleeding the Device before Use
- 9.4 Cleaning Method
- 9.5 Water Loss
- 9.6 Protection against Damage
- 10. AFTER USE INSTRUCTIONS
- 11.1 Cleaning of inlet filter
- 11.2 Cleaning of air vents
- 11.3 Greasing of couplings
- 12. TROUBLE SHOOTING
- 14. WARRANTY
- Zhejiang Xinchang Bigyao Power Tool Co., Ltd Head Office:
-8-
11.1 Cleaning of inlet filter
Clean the water inlet filter regularly
once a month or more frequently
according to use.
Carefully loosen the filter with a
screwdriver and clean it. Check that it
is intact before re-mounting it.
The inlet filter must always be fitted
inside the water inlet pipe to filter out
sand, limestone and other impurities,
as they will damage the pump valves.
CAUTION: Failure to fit the filter will
invalidate the warranty
11.2 Cleaning of air vents
The machine should be kept clean so as
to let cooling air pass freely through
the machine vents.
11.3 Greasing of couplings
To ensure an easy connection and that
o-rings do not dry up; the couplings
should be greased regularly.