Replacement Part List

-6-
9. INSTRUCTIONS FOR USE
9.1 Use
 The device is intended for private
use only.
 Clean machines, vehicles, buildings,
tools, facades, terraces, garden
tools etc. with the high-pressure
water jet. If necessary you can use
detergents. Please use detergents
sparingly, noting the quantities
recommended by the producer.
8. CONNECTION REQUIREMENTS
NOTE:The cleaning of motors/engines
and other surfaces that may be covered
with oil is only allowed in conjunction
with an appropriate oil separator.
 Do not clean any surfaces that may
contain hazardous materials, such as
asbestos.
8.1 Electrical connection
Only connect the machine to a properly
installed safety socket. Before inserting
the mains lead into the socket, check
whether the voltage you intend to use
complies with that of the machine.
8.2 Extension Lead
Only extension leads that are protected
against water spray should be used with
high mechanical strength and an
internal diameter of at least
3 x 1.5mm
2
.
8.3 Water Connection
The electric pressure washer is suitable
for connection to a standard domestic
water supply. Please observe the
regulations of your water supply
company.
9.2 Water
 If necessary, clean the supply water
with a water filter, any impurities in
the water could damage the pump.
 Operating the high-pressure cleaner
without water will damage the
pump.
Please ensure before switching on
the cleaner that the water supply is
available.
9.3 Bleeding the Device before Use
 The device must be connected to
the electricity and water supply
 Unscrew the high-pressure hose (6)
from the high-pressure connection
of the device.
 Switch on the device and allow it to
run until the water coming out of
C
D
B
A