Replacement Part List

9
1. Unscrew the container (A) from
the high pressure detergent bottle .
2. Add detergent to the container (A)
and screw the container to the high
pressure detergent bottle
3. Adjust the amount of detergent
with the button (B)
4. Foam equipped quick connector.
Press (C), then insert into the gun.
Caution: When attaching the
detergent bottle, the button (C)
should come out again. Check before
activating the trigger that the nozzle
is properly fixed.
1.)gun hook assembly ;
2.)Quick connector structure on the
machine body . All the Accessories can be
storaged on the machine .
The machine should be stored in a frost-free
room!
Pump, hose and accessories should always
be emptied of water prior to storing as
follows:
Stop the machine (press the start/stop
switch “O” and detach water hose, high
pressure hose and nozzle
Restart the machine and activate the trigger
of the trigger gun Let the machine run until
no more water runs through the trigger gun
Stop the machine, unplug and wind up hose
and cable.
Place trigger gun, lance, nozzles and other
accessories in the holders of the machine.
The hook can be used for storage of the
4. After use instructions
3.8 Install indicator diagram
3.7 High pressure detergent bottle