Replacement Part List
2
If an extension cable is used, the plug
and socket must be waterproof and
conform to the requirements below
regarding the length and dimensions of
the cable.
1,0 mm ² max. 12,5 m
1,5mm²max.20 m
If the power cable is damaged, it must
be replaced by the manufacturer, their
service agent or a qualified professional
in order to avoid any danger.
WARNING! This machine is not
designed to be used by persons
(including children) with reduced
physical, sensory or mental capacities
or whose lack experience or knowledge.
WARNING! It is advisable that you
supervise children to ensure that they
do not play with the appliance.
CAUTION! – Risk of explosion – do not
spray flammable liquids, do not direct
the jet towards flammable liquids.
WARNING! Water that has circulated
in the anti-back flow system is not
considered drinkable.
WARNING! Do not use the appliance if
the power cable or important parts of the
appliance are damaged, for example,
can be damaged the safety devices,
high pressure hoses and handgun.
WARNING! f you have an extension
cable, it must be waterproof.
WARNING! When you switch on the
machine, a recoil movement is produced
due to the force of the water jet. Use two
hands to control the lance. Wear safety
gloves when using the appliance. Wear
suitable protective clothing.
In case of accidental contact with
detergent, wash with water. If the liquid
comes into contact with the eyes, also
seek medical assistance (the detergent
can cause irritations or burns).
In the event that the appliance breaks
down, do not attempt to repair it yourself
but contact a professional technician to
avoid any danger.
Main power connection
The following must be observed when
connecting the high pressure washer to the
power supply:
Connecting the electrical connection should
be done by a qualified electrician conforming
to 60364-1 CEI
It is recommended that the electrical supply
to this machine should comprise a residual
current device which interrupts the current
if the leakage current exceeds 30 ma for
30ms.
CONNECTING TO THE
WATER NETWORK
WARNING
According to current guidelines, the unit
must never be operated without a system
separator on the potable water system.
Use a EN 12729 type BA system separator.
Water that passes through a system
separator is classified as non-potable.
WARNING! Always connect the system
separator to the water supply and never
directly to the device!