Replacement Part List

Open the lid in the back side of the
pressure washer, add detergent to
the bottle, replace the nozzle of
the spray gun to the detergent
nozzle as below, turn the pressure
washer on, then spray detergent by
pulling the gun trigger.
1.)gun hook assembly ;
2.)Quick connector structure on the
machine body . All the Accessories can be
storaged on the machine .
The machine should be stored in a frost-free
room!
Pump, hose and accessories should always
be emptied of water prior to storing as
follows:
Stop the machine (press the start/stop
switch “O” and detach water hose, high
pressure hose and nozzle
Restart the machine and activate the trigger
of the trigger gun Let the machine run until
no more water runs through the trigger gun
Stop the machine, unplug and wind up hose
and cable.
Place trigger gun, lance, nozzles and other
accessories in the holders of the machine.
The hook can be used for storage of the
hose and cord All accessories can be
stored in the washer after using.
WARNING: Never start up a frozen
machine. Frost damages are not covered by
the guarantee!
Old appliances contain valuable materials
that can be recycled. Please arrange for the
proper recycling of old appliances. Please
dispose your old appliances using
appropriate collection systems.
WARNING! Always disconnect the
electrical plug from the socket prior to
maintenance or cleaning.
5. Environmental protection
4. After use instructions
6. Maintenance, cleaner and repair
3.8 Install indicator diagram
3.7 Use of built-in detergent bottle
EN