Replacement Part List

1. Attach the high pressure hose (10)
to the trigger gun (11) and machine.
1. Screw the water inlet coupling (1)
tight on to the water inlet Note:
The inlet filter (A) must always be
fitted in the water inlet pipe to
filter out sand, lime stone and
other impurities as these will
damage the pump valves. Caution:
Failure to fit the filter will
invalidate the guarantee.
2. Connect the garden hose with a
standard quick coupling
Detach the high pressure hose by
pressing the pawl (A) or button (B)
1. Push the lance (15) into the trigger
gun (11)
2. When inserted turn it. Caution:
Make sure the lance (15) is properly
fixed to the gun (11)
3. Attach the nozzles (16-21). Caution:
When attaching the nozzle (16-21)
the button (A) on the nozzle (16-21)
should come out again. Check
before activating the trigger that
the nozzle (16-21) is properly fixed.
8
EN