User Manual

11
11
www.ReallyRightStu.com
CLEANING
Avoiding harsh environments such as sand and saltwater is essential to
preserving the life of your tripod. However, we do understand that sometimes
it is unavoidable. Therefore, we have made it simple to disassemble the leg
portions for thorough cleaning.
1. Unscrew Twist Lock and fully
remove leg section.
2. Remove Twist Lock, foot, and
Anti-Twist Sleeves.
3. Wipe down leg, foot, and ex-
posed threads with damp cloth,
removing any dirt or debris.
Allow to dry.
4. Apply a small amount of multi-
purpose grease to the exposed
leg threads.
5. Replace Anti-Twist Sleeves and
Twist Lock.
6. Holding Anti-Twist Sleeves
in place, insert leg into tripod
where the arrow meets with
gap between the Anti-Twist
Sleeves. Slide leg in completely.
7. Screw Twist Lock and foot back
into position. Rotate Twist Lock
back and forth to spread grease.
1a
2
1b 1c
6
See step-by-step tutorial: blog.reallyrightstu.com/cleaning-tripod-legs/