Manualshelf

User Manual

ManualsBrandsReally Right Stuff ManualsPhotographyTFA-01 Basic Pocket Pod and BH-25 Pro Ball Head Package
12
100% Made in the USA from parts sourced in the US.
100% Made in the USA from parts sourced in the US.
Specifications
BASIC Leg Positions (1) ..................................................fully splayed
ULTRA Leg Positions (3) ..... 1 angle stop, 2 angle stop, fully splayed
Load Capacity .............................................................. 15 lbs / 6.8kg
Stud ........................................................¼”-20 with ⅜”-16 Adapter
Folded Length with Stud .............................................5.8” / 147mm
ULTRA Height at 1 Angle Stop ....................................4.7” / 119mm
ULTRA Height at 2 Angle Stop .....................................3.3” / 84mm
Height Fully Splayed ......................................................1.5” / 37mm
Specifications
BASIC Leg Positions (1) ..................................................fully splayed
ULTRA Leg Positions (3) ..... 1 angle stop, 2 angle stop, fully splayed
Load Capacity .............................................................. 15 lbs / 6.8kg
Stud ........................................................¼”-20 with ⅜”-16 Adapter
Folded Length with Stud .............................................5.8” / 147mm
ULTRA Height at 1 Angle Stop ....................................4.7” / 119mm
ULTRA Height at 2 Angle Stop .....................................3.3” / 84mm
Height Fully Splayed ......................................................1.5” / 37mm
TFA-01 POCKET ‘POD
1146 Farmhouse Lane, San Luis Obispo, CA 93401 USA
1-805-528-6321 | 1-888-777-5557
www.ReallyRightStu.com
TFA-01 POCKET ‘POD
1146 Farmhouse Lane, San Luis Obispo, CA 93401 USA
1-805-528-6321 | 1-888-777-5557
www.ReallyRightStu.com
IN USE
IN USE
KEY FEATURES
KEY FEATURES
Rubberized foot
is secured with
stainless pin.
Rubberized foot
is secured with
stainless pin.
Wrap around rubberized
foot design assures positive
contact, even on curved
surfaces.
Wrap around rubberized
foot design assures positive
contact, even on curved
surfaces.
Pocket friendly size
when folded.
Pocket friendly size
when folded.
¼” - 20 stainless stud accepts
tripod head or camera. Use
included adapter if head has
larger 3/8” socket.
¼” - 20 stainless stud accepts
tripod head or camera. Use
included adapter if head has
larger 3/8” socket.
Black anodized apex is machined
from 6061-T6 aluminum. Internal
hardware is stainless steel.
Black anodized apex is machined
from 6061-T6 aluminum. Internal
hardware is stainless steel.
Black anodized legs are
machined from 6061-T6
aluminum.
Black anodized legs are
machined from 6061-T6
aluminum.
Maximum stability is
achieved when legs are
fully splayed.
Maximum stability is
achieved when legs are
fully splayed.
Use Torx keys
(included) to adjust leg
tension.
Use Torx keys
(included) to adjust leg
tension.
Stainless steel adapter
(included)
Stainless steel adapter
(included)
4
4
2
2
3
3
SET LEG TENSION
Optimal leg tension is set at the
factory. For tighter leg tension,
seat T10 Torx keys (included)
into leg bolts and rotate
clockwise to tighten.
SET LEG TENSION
Optimal leg tension is set at the
factory. For tighter leg tension,
seat T10 Torx keys (included)
into leg bolts and rotate
clockwise to tighten.
SET ANGLE STOPS
(ULTRA ONLY)
Open tripod
to 1st
position.
1
SET ANGLE STOPS
(ULTRA ONLY)
Open tripod
to 1st
position.
1
Swing leg inwards slightly.
2
Swing leg inwards slightly.
2
Slide angle
stop button
down.
3
Slide angle
stop button
down.
3
Swing leg out.
4
Swing leg out.
4
POCKET ‘POD BASIC
POCKET ‘POD BASIC
POCKET ‘POD ULTRA
with Angle Stops
POCKET ‘POD ULTRA
with Angle Stops

Summary of content (2 pages)