Installation Manual
3940 Tannahill Drive • Gurnee, IL 60031 • 800-982-1180 • 847-662-7722 • Fax: 847-662-7744 • www.RealWheels.com
Copyright ©2014 RealWheels Corporation. All Rights Reserved.
Product design and specifications are subject to alteration or change
in accordance with our policy of continual improvement.
12/8/15
3. Test the LED AirGuard Set & Go Using the Spot-Check Rubber Tester
4. Remove Spot-Check Rubber Tester and Install the LED AirGuard Set & Go
5. To Reset the LED AirGuard Set & Go to Zero and Recalibrate for a Different Tire Pressure
Place the LED AirGuard Set & Go with the Spot-Check onto the wheel air valve and push. (See Photo 3A & 3B.) The LED will light up red and
flash. This is your indication that the LED AirGuard Set & Go’s batteries are good and the unit is functioning properly.
Note: If the LED AirGuard Set & Go does not light up and flash you may have to push harder or the batteries maybe exhausted.
Remove the Spot-Check Rubber Tester. (See Photo 4A) Note: At this point the LED AirGuard Set & Go is now again set to zero and automatically
recalibrates to the tire pressure that has been set in the tire.
Now install the LED AirGuard Set & Go by threading it on by hand until it is securely tight, and you’re finished. (See photos 4B & 4C)
Important Note: Keep the Spot-Check Rubber Tester in the included Zip-Lock bag, so it available for future Spot-Checks or if the tire pressure
needs to be changed. To be safe it is recommended to verify the tire pressure and the LED AirGuard Set & Go functionality every month.
To reset the LED AirGuard Set & Go to zero, simply unthread and remove the LED AirGuard Set & Go from the wheel air valve.
The LED AirGuard Set & Go will automatically go back to a zero setting every time it is removed. It should not flash when removed
from the air valve.
To recalibrate, simply set the tire pressure to the desired air pressure and rethread the LED AirGuard Set & Go back onto the air valve.
The LED AirGuard Set & Go will automatically calibrate to the new tire pressure.
Note: If you need assistance contact RWC’s Customer Service at 1-800-982-1180.
3B
4A 4B 4C
3A