Specifications

Real Tone Technology Co., Lted www.realtonetech.com
Page 59/67
Figure 2-22 Details for the call
Table 2-26 Details for the call
Title Explanation
DSP Information This indicates the DSP chip used for the call, in which “t” indicates time
slot, “d” indicates the DSP chip, “c” refers to the channel on the chip.
Remote The IP address of the equipment at the far end, followed with RTP port
number.
Local port Local RTP port number of the call.
Codec The codec for this call.
RTP Packet Size
（millisecond）
Packet length of the RTP of the call.
Set Up time The time at which the call is answered.
CALL ID Call ID in SIP message.
RTCP Information The latest RTCP statistics report received by this call.
2.8
Log management
2.8.1 System status
Critical runtime information of gateways can be obtained in this interface, including:
1) The information about login of interface (including IP address and jurisdiction of the user);
2) SIP registration status;
3) Call related signaling and media (RTP) information;
After login, click the label of “Logst > System Status” to open this interface.