Specifications

Real Tone Technology Co., Lted www.realtonetech.com
Page 58/67
Title Explanation
Blind call transfer
Function key of blind call transfer，with default of *38.
User operation: During the call, tap the phone hook switch or press R
butto n→ dial *38→ dial the called number and then hang up.
Suspend call waiting The function key for cancelling the call waiting for next call, with
default of *64. Dialing this function key may temporarily shield the call
waiting for next call, avoiding the possible intervention.
Note: the function key works only for single cancel, if to cancel the call
waiting completely, please refer to the instructions on relevant
configuration of “subscriber line”.
2.7
Call status and statistics
2.7.1 Call status
After login, click the label of “Status > Call Status” to open this interface.
Figure 2-21 Interface of call status
Table 2-25 Parameters of call state
Title Explanation
Line There are six types of line statuses, including On-hook, Off-hook,
Ringing, Maintenance, Disconnect, Parallel line in-use.
Call The call state includes Idle, Ooutpusling, Ring, Entering number, In
progress, Ring back, Talk, Near end hung up, Far end hung up,
Timeout.
Click the label of “check detail” to open detail interface.