Specifications

Real Tone Technology Co., Lted www.realtonetech.com
Page 36/67
Destination Description and Example
ROUTE FXS
Route a call to FXS ports.
Example 1:
IP 800[0-3] ROUTE FXS 1,2,3,4
Select FXS port in a sequencial way.
Example 2:
IP 800[0-3] ROUTE FXS 1
Point this call to FXS port 1.
Example 3:
IP 800[0-3] ROUTE FXS 1,2,3,4/g
For terminating the call from IP, ring FXS port 1, 2, 3, 4 simultaneousely.
ROUTE FXO
Route a call to FXO port.
Example:
IP x ROUTE FXO 1,2,3,4/r
Select the outgoing call FXO port in a round robin way.
ROUTE IP Route a call to the IP platform.
Example:
FXS 021 ROUTE IP 228.167.22.34:5060
228.167.22.34:5060 is the IP address of the platform.
2.4.3 Application Examples of Routing Table
Some typical functions that can be realized by the routing table are provided in this section:
1) One Phone with Double Numbers
2) Hunting Group
3) Outbound Call Barring
4) FXO Port Hunting for Outbound Call
One Phone with Double Numbers
The hand set connected to gateway can be configured with two numbers through One Phone with
Double Numbers. For example, port FXS1 is set with PSTN number 61202701 and extention number
1001 for internal calling
Routing Setting
FXS 1001 ROUTE IP 127.0.0.1:5060
IP 1001 ROUTE FXS 1
Description:
1) Send the call with the called number starting with 1001 and from FXS port to 5060 port of
gateway IP;
2) Send the call with the called number starting with 1001 and from any IP to the FXS port 1.
Configuration number of FXS1 itself is 61202701, so the call of this number is not required to write
specialized routing.
Hunting Group
A hunting group can be associated with a set of FXS ports, and an inbound call from IP or FXO ports
can be routed to a hunting group. There are three circuit selection algorithms available: 1) sequential
selection, 2) circular selection, and 3) simultaneouse ringing.
Routing Setting: