Specifications

Real Tone Technology Co., Lted www.realtonetech.com
Page 32/67
Digit map Description
“#xx” End after receiving # and any two-digit number. “#xx” is primarily
used to stop function keys for supplementary services, such as CRBT,
Call Transfer, Do not Disturb, etc.
[2-8]xxxxxx A 7-digit number starting with of any number between 2-8, used to end
the dialing.
02xxxxxxxxx A 11-digit number starting with 02, used to end the dialings starting
with “02”.
13xxxxxxxxx A 11-digit number starting with 13, used to end the dialings.
11x A 3-digit number starting with 11, used to end the special service calls.
9xxxx A 5-digit number starting with 9, used to end special service calls.
2.4.2 Routing Table
After login, click “Routing> “Routing Table” tab to open the configuration interface.
Figure 2-7 Configuration Interface for Routing Table
Click “Help” to open the illustrative interface for routing configuration
The routing table with 100 rules in capacity provides two functions including digit transformation
and call routing assignment. Here are the general rules applied by gateways when executing the
routing table:
1) The routing rules in the table are executed from top to down, and the number matching
follows the principle of minimum & priority matching;
2) When there is no rule matched, the call will be processed as follows: