Specifications

Real Tone Technology Co., Lted www.realtonetech.com
Page 23/67
2.2
Buttons Used on Gateway Management Interface
“Submit” and “Restore Default Configuration” buttons are at the bottom of configuration interface.
l
Submit” Button: Submit configuration information. Users click “Submit” button after completion
of parameter configuration on a page. A success prompt will appear if configuration information
is accepted by the system; if a “The configuration takes effect after the system is restarted”dialog
box appears, it means that the parameters are valid only after system restart; it is recommended
that users press the “Restart” button on the “Tool” page to validate the configuration after
changing all parameters to be modified.
l
“Default” Button: Click this button to use default configuration of gateway. A success prompt
will appear on the interface after the system restores parameters on the configuration page to
default configuration. For part of parameters, it is required to restart the software to validate the
default configuration, and in this case“The configuration takes effect after the system is
restarted” will appear on the interface. Subscribers can click “Restart” on the “Tool” page to
restart.
2.3
Basic Configuration
2.3.1 Network Configuration
After login, click “Basic > Network” tab to open the configuration interface.
Figure 2-2 Network Configuration Interface