Specifications

Real Tone Technology Co., Lted www.realtonetech.com
Page 22/67
2.1.2 Log on Gateway
Double-click the icon to open IE browser, and enter the gateway IP address in the browser
address bar (eg. 192.168.2.218); you can enter the login interface for gateway configuration by
entering a password on the login interface.
Figure 2-1 Login Interface for WSS Gateway Configuration
2.1.3 Permission of Gateway Administrator
Logon users are classified into “administrator” and “operator”. The default password is seen Table
2-2. The password is shown in a cipher for safety.
Table 2-2 Default Passwords of Gateway
Type Default Administrator Passwords
(lowercase letters required)
Default Operator Password
WSS8 voip operator
WSS50 voip operator
WSS100 voip operator
WSS120 voip operator
l
The administrator can browse and modify all configuration parameters, and modify login
passwords.
l
The operator can browse and modify part of configuration parameters.
The gateways allow multiple users to log in:
Ø The administrator has permission for modification and the operator has permission for
browsing;
Ø When multiple users with same level of permission log in, the first has permission for
modification, while the others only have permission for browsing.
The system will confirm timeout if users do not conduct any operation within 10 minutes after login.
They are required to log in again for continuing operations.
Upon completion of configuration, click "Logout" button to return to the login page, so as not to
affect the login permission of other users.