Specifications

Real Tone Technology Co., Lted www.realtonetech.com

Page 14/67

Figure 1-4 WSS50 Back Panel

Table 1-11 Description of WSS50 Back Panel

# Description

① Ground pole

② AC power input socket, 100-240 VAC voltage input.

③

The configuration interface (CON) is used for local management and

debugging. It connects with RS232 port on a computer, and local PCs can

establish a connection with WSS50 through a emulator on the configuration

terminal. Table 1-12 describes the interface properties.

Table 1-12 Properties of WSS50CON Port

Properties Description

Connector DB9

Number of

Interface

Standard

RS232

Baud Rate 38400

Data Bit 8

Parity Check No

Stop Bit 1

Traffic

Control

1.3.3 WSS100-AG

Designed with a 1U high and 19” wide compact chassis and a swappable modular structure,

WSS100-AG can offer flexible on-site configuration and replacement. The interface card of

WSS100-AG uses a Champ50-type socket and is connected to the distribution panel in equipment

room using a 25-pair cable supplied with the unit. WSS100-AG supports the following types of

configuration:

Table 1-13 Configuration Combination of WSS100-AG

Models Number of FXS Ports Number of FXO Ports

WSS100-AG-48S 48 0

WSS100-AG-32FXO 0 32

WSS100-AG-16S/16 16 16

WSS100-AG-32S/4 32 4