User`s guide

Administrator’s Guide for Polycom HDX Systems
3–8 Polycom, Inc.
Output Upon Screen
Saver Activation
Polycom HDX 9006
Polycom HDX 9004
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD
Polycom HDX 7000 HD
Polycom HDX 7000
Specifies the screen saver output for a VCR or DVD
player.
Specifies whether black video or no signal is sent to the
VCR or DVD player when the system goes to sleep and
the screen saver activates.
Select Black if you want to send black video.
Select No Signal if you want the VCR or DVD player to
react as if it is not connected when the system goes to
sleep.
Note (Polycom HDX 8000 series and Polycom HDX 7000
series systems): When VCR/DVD Record Source is set
to Monitor 1 Image or Monitor 2 Image, the screen
saver setting for Monitor 3 is the same as for that other
monitor.
Monitor 4
Polycom HDX 9004
Specifies the fourth monitor’s aspect ratio:
•Off — Select if you do not have a fourth monitor.
•4:3 — Select if you are using a regular TV monitor as
the fourth monitor.
•16:9—Select if you are using a wide-screen monitor
as the fourth monitor. On the monitor, select the
display mode that uniformly stretches the video from
side to side, which is usually called Full, Wide screen,
or 16x9.
Video Format
Polycom HDX 9004
Specifies the format for Monitor 4. For a list of available
formats, refer to the information for your system in the
previous section of this chapter, Connecting Monitors on
page 3-1.
Note: If you use 16:9, you might also need to set up the
monitor for full-screen display. In the monitor’s setup
menu, choose the setting that stretches the picture
uniformly without clipping the edges, which is usually
called Full, Wide screen, or 16x9.
Resolution
Polycom HDX 9004
Specifies the resolution for Monitor 4.
Output Upon Screen
Saver Activation
Polycom HDX 9004
Specifies the screen saver output for Monitor 4:
Specifies whether black video or no signal is sent to the
monitor when the system goes to sleep and the screen
saver activates.
Select Black if you want to display black video. This is
the recommended setting to prevent burn-in for TV
monitors.
Select No Signal if you want the display to react as if it is
not connected when the system goes to sleep. This is the
recommended setting for VGA monitors and projectors,
as well as Polycom HDX media carts with 1080p
displays.
Setting Description