User`s guide

Monitors and Cameras
Polycom, Inc. 3–7
Monitor 3 (VCR/DVD)
Polycom HDX 9006
Polycom HDX 9004
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD
Polycom HDX 7000 HD
Polycom HDX 7000
Specifies the aspect ratio for recording.
•Off — Select if you do not have a VCR or DVD player
connected to record video conferences.
•4:3 — Select to record for playback on a standard
monitor.
•16:9—Select to record for playback on a wide-screen
monitor, if your recording device has this capability.
Note (Polycom HDX 9006, Polycom HDX 8000 series,
and Polycom HDX 7000 series systems): The video
format and resolution of Monitor 1 and Monitor 2 affect
the output sent to Monitor 3, as follows:
• When Monitor 1 and Monitor 2 are both on and are
both set to VGA (1920 x 1080 or 1280 x 720), DVI
(1920 x 1080 or 1280 x 720), or Component (NTSC
only), you can choose either Monitor 1 Image or
Monitor 2 Image as the output to Monitor 3
(VCR/DVD).
• When Monitor 1 and Monitor 2 are both on but only
one of them is set to VGA (1920 x 1080 or 1280 x
720), DVI (1920 x 1080 or 1280 x 720), or
Component (NTSC only), the output to Monitor 3
(VCR/DVD) is set to the image from that monitor.
• When Monitor 1 and Monitor 2 are both on but neither
is set to VGA (1920 x 1080 or 1280 x 720), DVI (1920
x 1080 or 1280 x 720), or Component, Monitor 3 is
disabled.
• If Monitor 2 is disabled, Monitor 3 is fully configurable
and independent of Monitor 1.
Video Format
Polycom HDX 9006
Polycom HDX 9004
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD
Polycom HDX 7000 HD
Polycom HDX 7000
Specifies the VCR or DVD player’s format. For a list of
available formats, refer to the information for your system
in the previous section of this chapter, Connecting
Monitors on page 3-1.
VCR/DVD Record
Source
Polycom HDX 9006
Polycom HDX 9004
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD
Polycom HDX 7000 HD
Polycom HDX 7000
Specifies the video source to be recorded to videotape or
DVD.
If Far is enabled, the recorded video will switch to the
current far site speaker. If both Near and Far are
enabled, the recorded video will switch between near and
far sites depending on the current speaker. If Content is
enabled, any content sent during the call is recorded.
Setting Description