User`s guide

Administrator’s Guide for Polycom HDX Systems
10–8 Polycom, Inc.
The following table describes the pairing states:
Pairing
To pair the Polycom Touch Control and Polycom HDX system during setup:
>> After selecting a language, enter the HDX system IP address in the
Polycom Touch Control interface and touch Connect.
To pair the Polycom Touch Control and Polycom HDX system after setup:
1 On the Polycom Touch Control Home screen, touch System.
2 Scroll to Device Connection Status and then touch Info next to the
HDX system.
3 Touch View Pairing Settings.
4 Change the HDX system IP address and touch Connect.
State Description
Paired The Polycom Touch Control is successfully
connected to the Polycom HDX system through the
pairing process, including providing the Polycom
HDX admin ID and password. A single Polycom
Touch Control can be paired to multiple Polycom
HDX systems and, once paired, the Polycom Touch
Control can switch between HDX systems without
needing to enter admin IDs or passwords.
Unpaired The ability to pair or connect to the Polycom Touch
Control is disabled on the Polycom HDX system.
The only way to unpair is to follow the Unpairing
procedure on page 10-9.
Connected A Polycom Touch Control has an active pairing
connection to the Polycom HDX system. A single
Polycom Touch Control can be paired to multiple
Polycom HDX systems, but can be connected to
only one HDX system at a time.
Disconnected The Polycom Touch Control does not have an
active pairing connection to an HDX system, but is
still paired if at least one HDX system that has
previously paired with the Polycom Touch Control
has not unpaired.
If you do not wish to pair during setup, select Pair Later. If you choose to skip
pairing, many Polycom Touch Control features are not available. You can pair at a
later time.