User`s guide

Managing the System Remotely
Polycom, Inc. 9–7
• Low battery power is detected in the remote control
• A system powers on
• Administrator logon is successful or unsuccessful
• A call fails for a reason other than a busy line
• A user requests help
• A telephone or video call connects or disconnects
Polycom HDX systems are compatible with SNMP versions 1 and 2c.
Downloading MIBs
In order to allow your SNMP management console application to resolve
SNMP traps and display human readable text descriptions for those traps, you
need to install Polycom MIBs (Management Information Base) on the
computer you intend to use as your network management station. The MIBs
are available for download from the Polycom RealPresence Room system’s
web interface.
To download the Polycom MIBs using the Polycom RealPresence Room system’s
web interface:
1 In your web browser address line, enter the HDX system’s IP address.
2 Go to Admin Settings > Global Services > SNMP.
3 Click Download MIB and follow the onscreen instructions.
Configuring for SNMP Management
To configure the Polycom HDX system for SNMP Management:
1 Do one of the following:
— In the local interface, go to System > Admin Settings > Global
Services > SNMP (select if necessary).
— In the web interface, go to Admin Settings > Global Services >
SNMP.