User`s guide

Administrator’s Guide for Polycom HDX Systems
8–20 Polycom, Inc.
Using the Minimum Security Profile
The following table shows the default values for specific Admin settings when
you use the Minimum security profile. With the Minimum security profile,
Security Mode is enabled but can be disabled. Red text indicates a difference
in a setting between operating with Security Mode on or off.
General Settings>Serial Port
RS-232 Mode Off Yes Off Yes
Network>IP Network
Enable SIP Disabled Yes Disabled Yes
Transport Protocol Auto Yes Auto Yes
Enable Network Intrusion Detection System (NIDS)
Note: Controlled only through the Security Mode
setting’s “Auto” option, which means this setting is
enabled when Security Mode is enabled.
Auto (Enabled) Read Only Auto
(Disabled)
Read Only
Cameras
Far Control of Near Camera Disabled Yes Disabled Yes
Global Services>Directory Servers
XMPP
Note: Controlled only through CMA or RealPresence
Resource Manager system provisioning.
Disabled Yes Disabled Yes
LDAP Disabled Yes Disabled Yes
Global Services>Calendaring Service
Enable Calendaring Service Disabled Yes Disabled Yes
Admin Settings Area/Setting
Low
(Security Mode On)
Low
(Security Mode Off)
Value Configurable Value Configurable
Admin Settings Area/Setting
Minimum
(Security Mode On)
Minimum
(Security Mode Off)
Value Configurable Value Configurable
General Settings>System Settings
Call Settings
Auto Answer Point to Point Video Disabled Yes Disabled Yes
Auto Answer Multipoint Video Disabled Yes Disabled Yes
Call Detail Report Enabled Yes Enabled Yes
General Settings>Home Screen Settings
Availability Control Disabled Yes Disabled Yes
Button (1-6): Recent Calls Enabled Yes Enabled Yes
Place a Call/Last Number Dialed Enabled Yes Enabled Yes